Ring Installation in London: Doorbells, Cameras, Alarm and Intercom

• Video doorbells: Battery Doorbell 2K, 2K Plus and 4K Pro; Wired Doorbell 2K, 2K Plus, 4K Pro and 4K Elite; and the Peephole Cam 2K for doors you cannot drill
• Chimes: Chime Pro, Chime and Chime Plus, plugged in and paired where an old wired chime is bypassed or there never was one
• Cameras: Outdoor Cam 2K and 4K Pro, Spotlight Cam 2K and 4K Pro, Indoor Cam 2K and Pan-Tilt Indoor Cam, plus the 4K Plus models on UK pre-order
• Floodlight cams: Floodlight Cam 4K Pro, 2K and 4K Plus, wired in place of an existing outside light
• Ring Alarm (2nd Gen): base station, keypad, sensors, range extender and Outdoor Siren
• Ring Intercom Audio and Ring Intercom Video, added to the door entry handset in a flat
• Older devices under their old names, such as the Video Doorbell 3 or 4, the Wired Video Doorbell Pro, the Stick Up Cam and the Floodlight Cam Wired Plus or Pro, refitted, moved or upgraded

• You buy the Ring device first, then book through the installation services page the article links to; complaints, rescheduling and cancellations go to Amazon Home Services, and refunds depend on the circumstances
• It is available in most of England, but not in Scotland, Wales or Northern Ireland, or in postcode areas beginning EX, TR, TQ or PL
• Which devices qualify, and how many go on one visit, is left to that installation services page or to Amazon Home Services
• If the device turns out to be faulty, the service is not charged, but you still pay the technician's call-out charge

• Victorian and Edwardian terraces: solid brick walls, which the Energy Saving Trust says most homes built before about 1920 have, so a cable needs a long drilled hole and Wi-Fi fades between the back room and the front step
• Converted flats and mansion blocks: a communal street door with an entry phone, flat entrance doors that are normally fire doors, and outside walls that belong to the freeholder
• Purpose-built blocks and towers: in a residential block of 18 m or seven storeys and up, notifiable electrical work needs the Building Safety Regulator's approval before it starts, unless it is done under a competent person scheme, so battery, plug-in and intercom devices are the simplest route there
• New-builds: often no bell wire at all and a wireless chime, with uPVC or composite doors whose frames hide steel reinforcement or carry a door-set warranty
• Rendered and pebble-dashed fronts: render can be hollow behind, so fixings go through to sound masonry and adhesive mounts are left for smooth surfaces
• Listed buildings and conservation areas: works that affect a listed building's character need listed building consent, so fixings are kept small and reversible and the council is asked first

• No mains work at all: battery doorbells and cameras, the Peephole Cam 2K, Ring Alarm, and Ring Intercom, which connects to the handset's low-voltage terminals
• No change to the fixed wiring: plug-in cameras, Ring chimes and wired doorbells on Ring's Plug-In Adapter
• Not notifiable, and fitted by JACK pros: a wired doorbell on the existing bell transformer, a like-for-like transformer swap or a transformer on a fused spur, a floodlight cam in place of an outside light on the same circuit, and PoE cabling
• Notifiable, and not booked through JACK: a new circuit, a transformer on a new way in the consumer unit, replacing the consumer unit, and any addition or alteration near a bath or shower

• Privacy zones: up to two per device, blacked out in live view and in recordings over a neighbour's door, window or garden, though Ring says movement behind one can still set off a recording
• Motion zones and sensitivity, so a doorbell on a London street wakes for your path and not for every passer-by
• Audio: off unless you need it; Ring says changing its audio recording setting requires a compatible Ring plan
• The angle: the doorbell at Ring's 1.2 m and cameras looking down on your own ground rather than across at the house opposite
• Your side of it: telling the neighbours, a small notice where a camera sees the street, and deleting clips you do not need

A vetted pro prices your Ring job from the model and your photos, and the JACK app shows that fixed price before you book.

Power moves the price more than the model name. A battery doorbell or camera on a wall with a good signal is the lightest job. A wired doorbell brings in the bell transformer: if yours gives 8–12 V AC and the doorbell needs 16–24 VAC, the job includes fitting Ring's 24 V Plug-In Adapter or a transformer on a fused spur, plus bypassing the old chime. A floodlight cam is priced as electrical work on your outside-light circuit, including any change to how it is switched.

The wall and the height come next: solid brick, render, a narrow uPVC frame that needs a wedge or corner kit, or a camera 2.5–3 m up that needs a ladder or a tower. On a high eave, your pro can ask another pro on JACK to help through the Pro2Pro feature. Cable runs through brick or to a PoE switch add time, and so does each extra device, though every device can go on one booking for one fixed price.

You buy the device; JACK does not sell any. Accessories the job needs, such as a transformer, a Ring Chime, a wedge kit or an outdoor junction box, are agreed and added at cost before you book, and so is parking where it has to be paid for. Prefer to pay for time? As a guide, hourly hire is typically £45–£95 per hour for smart home work and £55–£110 per hour for electrical work. For a big multi-device job, say a doorbell, three cameras and an alarm kit, a full-day handyman booking is a flat £350–£400 for up to 8 hours on site.