Do You Need an Electrician to Install Ring?

• Installing a new circuit
• Replacing a consumer unit (the fuse box)
• Any addition or alteration to existing circuits in a special location: in a room with a bath or shower, the space from the floor to 2.25 m (or the shower head, if higher) and 0.6 m out from the bath or tray edge, or 1.2 m from the shower head where there is no tray; or a room with a swimming pool or sauna heater

• Wired Doorbell 4K Pro: 'Hardwired: Installation by a qualified electrician may be required in your area'
• Floodlight Cam Wired Plus and Wired Pro: 'permits plus professional installation may be required by law', and 'DO NOT INSTALL if a working earth connection is not available'
• Ring's UK store and install guides recommend professional installation for its wired doorbells and floodlight cams
• Ring's 4K Pro guide: if you are unsure which breaker to switch off, 'turn off the master breaker or contact an electrician'

• The circuit is isolated at the consumer unit and proved dead before a cover comes off
• Floodlights: a working earth at the outside light, since older London lighting circuits sometimes have none and Ring rules out installing without one
• Floodlights: no dimmer or timer on the feed, as Ring requires; a separate timer or sensor switch comes out, and a wall switch is left on or bridged so the cam has a permanent live
• RCD protection on the circuit being worked on, and whether the existing circuit is in good enough condition to add to
• The route of any new cable, so it avoids fire doors, communal walls and anything the lease or tenancy rules out

• A new circuit from the consumer unit, including a transformer on a spare way
• A new or replacement consumer unit
• Any new point or change inside a bathroom's special location
• Notifiable work in a residential block of 18 m or 7 storeys and up, which also needs Building Safety Regulator approval unless it is done under a competent person scheme

• A photo of the existing outside light, and of the switch that controls it indoors
• A photo of the consumer unit with its cover closed, showing the labels and any RCD
• The Ring model, and anything else you want on the same booking
• In a rented home, the landlord's consent; the landlord should also get a copy of any electrical certificate

A vetted pro prices your Ring job from the model and your photos, and the JACK app shows that fixed price before you book.

Power moves the price more than the model name. A battery doorbell or camera on a wall with a good signal is the lightest job. A wired doorbell brings in the bell transformer: if yours gives 8–12 V AC and the doorbell needs 16–24 VAC, the job includes fitting Ring's 24 V Plug-In Adapter or a transformer on a fused spur, plus bypassing the old chime. A floodlight cam is priced as electrical work on your outside-light circuit, including any change to how it is switched.

The wall and the height come next: solid brick, render, a narrow uPVC frame that needs a wedge or corner kit, or a camera 2.5–3 m up that needs a ladder or a tower. On a high eave, your pro can ask another pro on JACK to help through the Pro2Pro feature. Cable runs through brick or to a PoE switch add time, and so does each extra device, though every device can go on one booking for one fixed price.

You buy the device; JACK does not sell any. Accessories the job needs, such as a transformer, a Ring Chime, a wedge kit or an outdoor junction box, are agreed and added at cost before you book, and so is parking where it has to be paid for. Prefer to pay for time? As a guide, hourly hire is typically £45–£95 per hour for smart home work and £55–£110 per hour for electrical work. For a big multi-device job, say a doorbell, three cameras and an alarm kit, a full-day handyman booking is a flat £350–£400 for up to 8 hours on site.