Older eufy Systems We Still Set Up and Move

• eufyCam 2 (T8114), 2C (T8113), 2 Pro (T8140), 2C Pro (T8142) and eufyCam E (T8112): battery cameras made for HomeBase 2; the 2C was later sold as the eufyCam S210
• eufyCam 3 (T8160), later sold as the eufyCam S330, and eufyCam 3C (T8161), the S300: cameras that came with HomeBase 3
• eufyCam E330 Professional (T8600): a 4K camera on a plug-in mains adapter, made for HomeBase 3
• Video Doorbell 2K Wired (T8200), 1080p Wired (T8201), 2K Pro Wired (T8202) and Dual 2K Wired (T8203)
• Floodlight Cam 2 Pro (T8423), for which eufy's UK store still sells accessories under the name Floodlight Cam S330

• Not compatible: the older wired doorbells T8200 to T8203, the Floodlight Cam 1080p (T8420) and the 4G Starlight camera (T8150)
• Storage only: the Floodlight Cam 2K (T8422 and T8424) records to HomeBase 3 without BionicMind face recognition, and for the Floodlight Cam 2 Pro (listed as Floodlight Cam 2K Pro, T8423) eufy lists BionicMind as under evaluation
• Fully compatible: the eufyCam 2, 2C, 2 Pro, 2C Pro, eufyCam E and original eufyCam are listed as compatible for both storage and BionicMind, so they can move across from a HomeBase 2
• The current S4 Wired Video Doorbell does work with a HomeBase S380, so the limit applies to the older wired codes only

• Video Doorbell E340, SoloCam S340, Floodlight Camera E340 and Indoor Cam S350: V3.3.2.6 or later
• eufyCam S4: V3.7.2.8 or later, without which its 24/7 recording and snapshots do not work
• A HomeBase 2 cannot take the newer cameras: eufy lists the eufyCam S3 Pro, eufyCam S4, C35 and C37 as not supporting it, though the S4 also runs with no HomeBase at all

• The 2K Wired, 1080p Wired, 2K Pro Wired and Dual 2K Wired doorbells need 16–24 VAC at 30 VA or more
• eufy put a power adapter in the UK box of the 2K Wired doorbell, along with a plug-in chime
• These doorbells record to their own storage: 4 GB on the 2K and 1080p Wired, 32 GB on the 2K Pro and 8 GB on the Dual 2K
• Floodlight Cam 2 Pro: hardwired only at 110–240 V, 2.4 GHz Wi-Fi only, 8 GB of storage that cannot be expanded, mounted no higher than 3 m and tilted no more than 30°

• At the old address: devices taken down, holes filled, and any bypassed chime wired back in, ideally from a photo of its original wiring
• At the new address: the HomeBase sited first, by the new router on Ethernet, standing on a shelf rather than fixed to a wall
• HomeBase cameras pair with the HomeBase rather than your router, so the new router mainly affects the HomeBase; standalone cameras and doorbells join the new Wi-Fi one by one
• Each camera position re-tested against eufy's range before drilling, and a wired doorbell checked against the new home's bell transformer

• The T-number from each device or its box, or the name the eufy app shows
• A photo of each device on the wall, and of the HomeBase and where it sits
• For a wired doorbell, the bell transformer's label and the chime it rings
• If the system is moving, the new home's layout: where the router is and where each camera should go

A vetted pro prices your job from the eufy model, photos of where each device goes and what power is there now, and the JACK app shows you that fixed price before you book.

The power and the walls move the price more than the device does. A battery doorbell on a brick reveal, or a SoloCam on a fence post, is a smaller job. An S4 Wired doorbell on a new transformer, a HomeBase moved to the middle of the house with a hard drive fitted, a Floodlight Camera E340 in place of an outside light, or four PoE cameras cabled through solid brick and a loft all take longer, and the price reflects that.

The eufy kit is yours to buy, since JACK sells no devices. A stronger transformer, a Chime 2, a wedge, a floodlight's weatherproof box or extra Cat cable is agreed with you and added at cost before you book, and several devices go on one booking for one price. Where parking has to be paid for, that is added at cost and agreed before you book too.

Prefer to pay for time? As a guide, smart home work is typically £45–£95 per hour, and electrical work such as a floodlight camera £55–£110 per hour. For a multi-camera system or a PoE NVR, a full-day booking is a flat £350–£400 for up to 8 hours on site.