Philips Hue Outdoor Wall Light Installation in London

• Econic wall lights, and the hardwired Impress, which Hue says needs only two hands to install; Hue's UK store also lists a separate low-volt Impress
• Semeru and Scenova, rectangular wall lights that list Bluetooth as well as Zigbee; Semeru also goes on a ceiling
• Muscari and Struana wall spotlights, where Muscari's light source can be replaced
• The Welcome floodlight, which showed 'Only a few left' on Hue's UK page on 1 November 2026
• Dymera, a Class I wall light rated IP44 that Hue says is made for use indoors or outside

• Approved Document P (2013) lists replacements anywhere, and additions or alterations to existing installations outside special locations, as not notifiable
• The IET's Part P questions and answers say a light fitted outside is not notifiable as long as it connects to an existing circuit
• Not notifiable does not mean unchecked: Approved Document P expects the work to be inspected, tested and certificated to BS 7671, so ask your pro for a Minor Electrical Installation Works Certificate

• An earth at the fitting: lighting circuits installed before 1966 often have none, and a Class I light needs one, so the pro confirms it before you settle on a model
• RCD protection: new or significantly altered lighting circuits need a 30 mA RCD; if a circuit without one only has its fitting changed, the pro tells you, since an upgrade at the fuse board is not booked as part of this job
• The fixing: render and brick take masonry fixings, and the cable entry behind the light is sealed against rain
• Access: a first-floor wall may need a tower, or your pro can ask another pro on JACK to help through the Pro2Pro feature
• Consent: a flat's outside walls usually belong to the freeholder, and works that affect a listed building's character need listed building consent

• Leave the indoor switch on and run the light from the app, a schedule or a battery remote
• Fit Hue's battery wall switch module behind that switch: it needs a Hue Bridge but no neutral, and the light becomes permanently live, so the breaker goes off before anyone works on it
• Swap an old PIR, photocell or timer for Hue's outdoor motion sensor, which runs on two AA batteries, is rated IP54 and detects movement up to 10 m away
• Keep dimmers off the circuit: Hue's safety leaflet says its fittings should not be connected to an additional dimmer

A vetted pro prices your Hue job from the products and your photos, and the JACK app shows that fixed price before you book.

Whether the job touches your wiring matters more than how many lights there are. Fitting B22 or GU10 bulbs, setting up a Bridge and plugging in lamps, Play bars or a lightstrip is set-up work. Ceiling lights, Perifo track, wall switch modules and mains outdoor lights are electrical work on your existing circuits, priced for the isolating, connecting and testing each one needs.

Then the home itself: a heavy fitting that has to go into a joist, a high or sloping ceiling, a two-way landing that needs a module at both switches, old cable with no earth, or a long garden run for low-volt lights. On a high ceiling or a long fitting, your pro can ask another pro on JACK to help through the Pro2Pro feature. Several Hue jobs, and devices from other brands, go on one booking for one fixed price.

You buy the Hue products; JACK does not sell them. Accessories the job needs, such as a deeper back box, an in-use cover for an outdoor socket or aluminium channel for a strip, are agreed and added at cost before you book, and so is parking where it has to be paid for. Prefer to pay for time? As a guide, hourly hire is typically £45–£95 per hour for smart home work and £55–£110 per hour for electrical work, and a full-day handyman booking is a flat £350–£400 for up to 8 hours on site, which suits a whole-house Hue fit.