Skip to content

Philips Hue · Garden lighting

Philips Hue Garden Lighting Installation in London

Updated

Hue's low-volt garden system is a kit: a weatherproof power supply, cable, connectors and lights that each draw a set number of watts. A vetted JACK pro plans the runs within Hue's limits, keeps cable clear of spades and mowers, and leaves every light named in your Hue app.

In short

Yes: a JACK pro in London can lay out and fix Philips Hue low-volt garden lights such as Lily, Calla and the outdoor strips, run from Hue's 40 W or 100 W outdoor power supply in an outdoor socket. The job needs that socket, or a new one added on an existing circuit with 30 mA RCD protection, a power budget that covers every light and, for Lily and most of the range, a Hue Bridge whose signal reaches the garden. The fixed price is in the JACK app before you book.

Send photos of the garden marked with where each light should go, a photo of any outdoor socket with its cover open, the Hue boxes you have, and where your Hue Bridge sits in the house.

Get matched

Start a JACK request

Full request

Native app

Start the request here, then add extra photos or videos from the JACK app if the pro needs more detail.

Philips Hue garden lighting pros install

Each guide covers how the model is powered and mounted, what the pro does and what to send before booking.

How is Hue's low-volt garden system put together?

Hue's UK guide describes low-volt as lighting made for outdoor spaces, fed through a transformer inside its power supply unit. Every set-up uses the same parts:

  • A power supply of 40 W or 100 W, rated IP67 and double insulated, taking mains from a plug and giving out a 0.6 m low-voltage lead
  • Hue's outdoor extension cables, rated IP67 and listed at 24 V DC, joined with screw-together T-connectors
  • Lights such as Lily spots on ground spikes with adjustable mounts, the larger Lily XL, Calla pedestals and the outdoor strips
  • Base kits, which Hue sells with a power supply included

Hue's UK low-volt guide lists an Econic pedestal, while the Econic wall light is a 220–240 V mains fitting, so check the box before booking.

Philips Hue Lily outdoor spotlights installation

How many Hue garden lights can one power supply run?

Add up the watts. Hue's Lily page says 'A 40 W power supply unit will power five Lily spotlights or three Lily XL spotlights'. Hue lists Lily at 8 W and Lily XL at 15 W, so three Lily XL come to 45 W on paper, and where the sum is that tight the pro plans for the 100 W supply or a second one.

  • The 40 W supply takes up to 35 m of cable in total
  • The 100 W supply has two outputs, each with up to 30 m of cable
  • Hue's extension cable page gives 35 m as the total system length per power supply, so where the pages differ the pro plans within the shorter figure
  • The Flux outdoor strip comes with its own supply or joins an existing low-volt run, where its 30 W at 10 m counts towards the budget

Where does the power supply plug in?

Hue's instruction is to plug the power supply into an outdoor socket, and that socket shapes most of the job:

  • An existing outdoor socket: reviews on Hue's own UK pages complain that the supply's plug does not suit outdoor sockets, so a socket with a deep in-use lid, or a weatherproof box around the plug, may be needed and is agreed at cost before booking
  • No outdoor socket: a pro who does electrical work can add one as a spur from an existing circuit, which is not notifiable in England but must have 30 mA RCD protection (BS 7671 regulation 411.3.3); ask your pro for a Minor Electrical Installation Works Certificate for it
  • A mains cable buried on the way to that socket needs armour or a duct, normally at least 600 mm down with marker tape, according to ELECSA's garden guidance
  • An extension lead trailed out of a window is not a fixed supply, and pros do not leave the lights running from one

A brand-new circuit from the fuse board to the garden or a shed is notifiable: that is a registered electrician's job, outside a JACK booking.

Low-volt lights fixed in a garden are still an electrical installation

Approved Document P covers fixed lighting in gardens, extra-low-voltage installations included, even where the final connection is a 13 A plug. Laying Hue's system from an existing socket is not notifiable, but it still has to be safe:

  • Cable runs along walls, fences and bed edges, away from where a spade or mower will go, and through conduit under paving
  • Hue's UK pages give no burial depth for the low-volt cable; its US guide says the cable can be tucked under mulch or a thin layer of soil, with no deep trench or metal conduit
  • Spikes set firm in the bed, and any wall mounts fixed with masonry plugs, so lights stay aimed where you chose
Low-volt or mains: which Hue outdoor system have you bought?

Will the Hue Bridge reach the far end of the garden?

Hue's Lily page says 'All outdoor Philips Hue products require a Hue Bridge (sold separately)', and the Lily XL and Festavia permanent pages also call for one, although the Flux outdoor strip and some newer mains wall lights list Bluetooth as well. Hue says every light repeats the signal, so a run of lights can carry it further than the Bridge alone.

  • The first light goes where the house can still reach it, often on the back wall, and the rest step down the garden from there
  • Every light is paired, named and grouped by area in the app, then tested from the far end of the garden
Philips Hue Bridge and set-up

What do Hue's outdoor strips and permanent string lights need?

Hue also sells outdoor strips and permanent lights, and each sets up a little differently:

  • Flux outdoor strip, 10 m: comes with a low-volt power supply or joins an existing low-volt set-up; the strip is IP67 but Hue rates its power supply IP20, so the supply needs a dry spot; it cannot be cut or extended
  • OmniGlow outdoor lightstrip, 3 m, with a resealing kit that Hue sells separately
  • Festavia permanent, 18 m with 32 pods, for eaves and rooflines: Hue's UK page lists a 24 V input, an IP65 rating and a power supply in the box
Philips Hue Festavia permanent outdoor lights installation

Hue low-volt parts compared: power, rating and cable

From each product's Philips Hue UK page, read on 1 November 2026. Add the watts of every light on a supply before choosing it.

Hue partPowerRatingCable and fitting notes
Outdoor power supply 40 WUp to 40 W, 220–240 V inIP67, Class IIUp to 35 m of cable; 0.6 m low-voltage lead
Outdoor power supply 100 WUp to 100 W, 220–240 V inIP67, Class IITwo outputs, each up to 30 m of cable
Extension cable (2.5 m or 5 m)24 V DCIP67, Class IIIPage gives 35 m as the most per power supply
T-connector for LowVoltConnector onlyIP67Screw-together; splits one run into two
Lily spotlight8 WIP65, Class IIGround spike; Hue says five on a 40 W supply
Lily XL spotlight15 WIP65, Class IIIHue says three on a 40 W supply, though three come to 45 W
Flux outdoor strip, 10 m30 W; 3,000 lmStrip IP67; power supply IP20Not cuttable or extendable
Festavia permanent, 18 m24 V inputIP65Power supply included; 2.5 m to the first LED

Hue's UK power supply pages label the lead '24 V cable length 0.6 m' but give no separate output voltage; the extension cable page lists 24 V DC.

How is Philips Hue installation priced in London?

A vetted pro prices your Hue job from the products and your photos, and the JACK app shows that fixed price before you book.

Whether the job touches your wiring matters more than how many lights there are. Fitting B22 or GU10 bulbs, setting up a Bridge and plugging in lamps, Play bars or a lightstrip is set-up work. Ceiling lights, Perifo track, wall switch modules and mains outdoor lights are electrical work on your existing circuits, priced for the isolating, connecting and testing each one needs.

Then the home itself: a heavy fitting that has to go into a joist, a high or sloping ceiling, a two-way landing that needs a module at both switches, old cable with no earth, or a long garden run for low-volt lights. On a high ceiling or a long fitting, your pro can ask another pro on JACK to help through the Pro2Pro feature. Several Hue jobs, and devices from other brands, go on one booking for one fixed price.

You buy the Hue products; JACK does not sell them. Accessories the job needs, such as a deeper back box, an in-use cover for an outdoor socket or aluminium channel for a strip, are agreed and added at cost before you book, and so is parking where it has to be paid for. Prefer to pay for time? As a guide, hourly hire is typically £45–£95 per hour for smart home work and £55–£110 per hour for electrical work, and a full-day handyman booking is a flat £350–£400 for up to 8 hours on site, which suits a whole-house Hue fit.

How it works

Step 1

List the products and add photos

Name the Hue products you have, or paste the order, and photograph where each goes: the existing light and ceiling, the switch that runs it, the outside wall for garden lights, and your router.

Step 2

Accept one fixed price, then book a day

A vetted pro prices the whole list from your photos, and any part the job needs is agreed at cost up front. Only once you accept that price do you book, picking a day that suits you, with evenings and weekends where pros offer them.

Step 3

Fitted, connected and handed over

Power isolated before any light or switch is touched, each item fixed, connected and tested, then added to your Bridge with rooms and scenes set up with you.

Frequently asked questions

Do Philips Hue garden lights need an electrician?

Not a registered electrician where an outdoor socket is already there: the low-volt kit plugs in, and fixing its lights and cable is electrical installation work that is not notifiable. A new outdoor socket on an existing circuit is a job for a pro who does electrical work; a new circuit to the garden is a registered electrician's.

What is the Philips Hue low-voltage transformer?

Hue calls it the outdoor power supply: a weatherproof, double-insulated unit in 40 W and 100 W sizes that turns the mains from a plug into low voltage for the lights. Pick the size by totting up the watts of every light it will feed.

Can the Hue power supply sit indoors with the cable through the wall?

Hue does not describe that set-up: its instructions are to plug the power supply into an outdoor socket. If you have no outdoor socket, a pro who does electrical work can add one on an existing circuit instead.

Can I extend Hue garden lights I already have?

Usually, with Hue's 2.5 m and 5 m extension cables and a T-connector, as long as the extra lights stay inside the supply's watts and the cable limit. If they would not, a second power supply or the 100 W one is the answer.

How much does Hue garden lighting installation cost in London?

It is a fixed price set from your garden photos and the lights you bought, shown in the JACK app before you book. Smart home work hired by the hour typically runs at £45–£95 per hour as a guide, any new socket is priced as electrical work, and enclosures or conduit are added at cost, agreed before you book.

More Philips Hue guides

Related services in London

Sources

The device facts and rules on this page come from these pages, checked on 1 November 2026.

Jack All Trades (JACK) is an independent London service. It is not part of, affiliated with or endorsed by Signify, which makes Philips Hue and uses the Philips brand under licence, or by Philips. Philips Hue product names are used only to describe the products JACK pros fit and set up; prices are set by JACK pros, not by Signify, and JACK does not sell Hue products.

Get your Philips Hue fitted

List your Hue products in the JACK app with photos of the lights, switches and walls involved. A vetted pro prices the whole job up front, and you pick a time that suits you.

Get a fixed price in the app